Mig Welding

Gas metal arc welding (GMAW), sometimes referred to by its subtypes metal inert gas (MIG) welding or metal active gas (MAG) welding, is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt, and join.

Along with the wire electrode, a shielding gas feeds through the welding gun, which shields the process from contaminants in the air. The process can be semi-automatic or automatic. A constant voltage, direct current power source is most commonly used with GMAW, but constant current systems, as well as alternating current, can be used.

There are four primary methods of metal transfer in GMAW, called globular, short-circuiting, spray, and pulsed-spray, each of which has distinct properties and corresponding advantages and limitations. Originally developed for welding aluminium and other non-ferrous materials in the 1940s, GMAW was soon applied to steels because it provided faster welding time compared to other welding processes.

The cost of inert gas limited its use in steels until several years later, when the use of semi-inert gases such as carbon dioxide became common. Further developments during the 1950s and 1960s gave the process more versatility and as a result, it became a highly used industrial process.

Today, GMAW is the most common industrial welding process, preferred for its versatility, speed and the relative ease of adapting the process to robotic automation. Unlike welding processes that do not employ a shielding gas, such as shielded metal arc welding, it is rarely used outdoors or in other areas of air volatility. A related process, flux cored arc welding, often does not use a shielding gas, but instead employs an electrode wire that is hollow and filled.

On the full-time Level 3 and Level 4 Welding and Fabrication Program we will teach you all you need to know about this and the other types of welding and fabrication to help start you in a career in welding.

On the full-time Welding and Fabrication Programme you will also learn about the following…

Gas Cutting

Gas Cutting- Oxyacetylene Contact us Oxyacetylene gas welding cutting is commonly used to cut mild steel. A mixture of oxygen and acetylene, burns as an

Plasma Cutting

Plasma Cutting Contact us Plasma cutting is a process that is used to cut steel and other metals of different thicknesses (or sometimes other materials)

Tig Welding

Tig Welding Contact us Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a

Arc Welding

Arc Welding Contact us  Manual Metal Arc Welding (MMAW), Arc Welding or Stick Welding as it is commonly known is more portable than other types